An Experimental Study of Torsional Properties of Polyvinylchloride

https://doi.org/10.24017/science.2017.3.24

Abstract views: 1236 / PDF downloads: 980

Authors

  • Sarkawt Rostam Dept of Production Eng & Metallurgy, College of Engineering, Sulaimani Polytechnic University, Sulaimani, Iraq
  • Arazw Hamakarim Dept of Production Eng& Metallurgy, College of Engineering, Sulaimani Polytechnic University Sulaimani, Iraq
  • Avan Xalid Dept of Production Eng& Metallurgy, College of Engineering, Sulaimani Polytechnic University Sulaimani, Iraq
  • Pari Said Dept of Production Eng& Metallurgy, College of Engineering, Sulaimani Polytechnic University Sulaimani, Iraq
  • Kashab Muhammad Dept of Production Eng& Metallurgy, College of Engineering, Sulaimani Polytechnic University Sulaimani, Iraq

Abstract

In this research, an experimental study has been performed to investigate the mechanical properties through torsion testing of polyvinylchloride (PVC) polymer specimens. For the purpose of the experimentation, specimens of PVC round bars have been prepared. Torsion testing machine apparatus of 200 Nm motor driven was used to evaluate the torsion properties of the tested bars. The apparatus provides four deformation speeds of 50°/min, 100°/min, 200°/min and 500 °/min. The tests conducted under different conditions in a room temperature and cooling of the samples and tested at different deformation speeds given by the torsion apparatus. Various tests produce the torsional moment- angle of rotation diagrams and thereafter both of torsional fracture resistance and shear modulus have been calculated. The results showed the effect of temperature change on the mechanical properties of PVC by making the material harder and can resist higher value of the applied torque where the range is from 2.9 N.m for the cooled sample to 2 N.m for the received samples tested at room temperature. Moreover the results showed an increase of shear modulus to 282 MPa for the cooled samples in compare to 140 MPa for as received samples. Finally the results provide a guideline for designers on how to use parts made of PVC in different applications where the range of both the maximum torque and failure torque with their mechanical properties of rigidity and torsional resistance were recorded.

Keywords:

Polyvinylchloride, Torsion test, Torsional moment, Angle of rotation, Shear modulus.

References

[1] P.C. Sugumaran, "Experimental study on dielectric and mechanical properties of PVC cable insulation with Sio2/Caco3 nano fillers", IEEE Annual Report Conference on Electrical Insulation and Dialectic Phenomena, pp. 503-506, 2015.
https://doi.org/10.1109/CEIDP.2015.7352072
[2] W. Bolten, Engineering Materials Technology, Third edition, 1998.
[3] Polyvinylchloride (PVC) [Online]. Available: http://www.pvc.org/en. [Accessed: March 10, 2017].
[4] Y. Kemari, A. Mekhaldi, M. Teguar, "Investigation into the dissipated energy under accelerated thermal aging in PVC/B used in low voltage cables insulation", pp. 1-4, IEEE 2016.
https://doi.org/10.1109/ICD.2016.7547703
[5] C. Sunanda, M.N. Dinesh, N. Vasudev, "Performance evaluation of silicon rubber insulating material with MgO and ZnO nano fillers", pp. 1-5, IEEE 2016.
https://doi.org/10.1109/ICHVE.2016.7800774
[6] I. K. Bishay, S.L. Abd-El-Messieh, S.H. Mansour, "Electrical, mechanical and thermal properties of polyvinyl chloride composites filled with aluminum powder", Journal of Materials & Design, 32(1), pp. 62-68, 2011.
https://doi.org/10.1016/j.matdes.2010.06.035
[7] H. Wang, G. Xie, M. Fang, Z. Ying, Y. Tong, Y. Zeng, "Electrical and mechanical properties of antistatic PVC films containing multi-layer graphene", Journal of Composites Part B 79, pp. 444-450, 2015.
https://doi.org/10.1016/j.compositesb.2015.05.011
[8] M. Colloca, G. Dorogokupets, N. Gupta, M. Porfiri, "Mechanical properties and failure mechanisms of closed cell PVC foams", International Journal of Crashworthiness, 17(3), pp. 327-336, 2012.
https://doi.org/10.1080/13588265.2012.661637
[9] A. Ashori, H. Kiani, S.A. Mozaffari, "Mechanical properties of reinforced PVC composites: effect of filler form and content", Journal of Applied Polymer Science, 120, pp. 1788-1793, 2011.
https://doi.org/10.1002/app.33378
[10] F.C. Grozema, P. T. V. Duijnen, Y.A. Berlin, M. A. Ratner, L.D.A. Siebbeles, "Intra molecular charge transport along isolated chains of conjugated polymers: effect of torsional disorder and polymerization defects", Journal of Physics Chemistry B, 106, pp. 7791-7795, 2011.
https://doi.org/10.1021/jp021114v
[11] A. Ghobarah, M. N. Ghorbel, S. E. Chidiac, "Upgrading torsional resistance of reinforced concrete beams using fiber-reinforced polymer", Journal of Composites for Construction, 6(4), pp. 257-263, 2002.
https://doi.org/10.1061/(ASCE)1090-0268(2002)6:4(257)
[12] F. Povolo, G. Schwartz, E. B. Hermida, "Stress relaxation of PVC below the yield point", Journal of Polymer Science Part B: Polymer Physics, 34, pp. 1257-1267, 1996.
https://doi.org/10.1002/(SICI)1099-0488(199605)34:7<1257::AID-POLB7>3.0.CO;2-S
[13] Equipment for Engineering Education, GUNT Catalogue, Germany. Torsion Testing Machine, 200 Nm motor driven.

Downloads

Article Metrics

Published

27-08-2017

Issue

Section

Pure and Applied Science

How to Cite

[1]
S. Rostam, A. Hamakarim, A. Xalid, P. Said, and K. Muhammad, “An Experimental Study of Torsional Properties of Polyvinylchloride”, KJAR, vol. 2, no. 3, pp. 273–278, Aug. 2017, doi: 10.24017/science.2017.3.24.